Article ID : 2020/JERR/58026: Die Attach Process Optimization with Enhanced
Epoxy Controlon Leadframe Package
Rennier S. Rodriguez1*, Edwin M. Graycochea Jr1, Rammil A. Seguido1 and
Frederick Ray I. Gomez1
Please provide corresponding author email id.
1New Product Development and Introduction, STMicroelectronics Inc., Calamba City, Laguna, 4027,
Philippines.

_____________________

Article ID : 2020/JERR/58706: Studying the Appropriate Underground Mining
Methods in Sukari Gold Mine
Almoataz bellah M. Khalifa1*, Mohamed A. Gouda2 and Mohamed A. Yassin3
1Department of Mining and Petroleum, Faculty of Engineering, Al-Azhar University, Cairo, Egypt.

_____________________

 Article ID : 2020/JERR/58522: Comparison of Optimization of Exergy Efficiency of
a Crude Distillation Unit Using Artificial NeuralNetwork (ANN) and Response Surface Methods (RSM)
M. N. Braimah1*
1Applied Thermodynamics and Process Design Unit, Department of Chemical Engineering, Obafemi
Awolowo University, Ile-Ife, Osun State, Nigeria.

_____________________

 Article ID : 2020/JERR/58320: Design of Upper A Arm of Double Wishbone
Suspension System
M. Amarnath1*, K. Sriram Prasad1 and Jeevan Babyloni1
1Mechanical Engineering, Vasavi College of Engineering, India.

_____________________

Article ID : 2020/JERR/58107: Effect of Deficit Irrigation under Different Crop onCrop Productivity and Water Use Efficiency- A Review
Dessie Gieta Amare1* and Zigigit Kassa1
1Department of Natural Resources Management, Debre Markos University
Ethiopia, P.O.Box: 18, Ethiopia.

_____________________

Article ID : 2020/JERR/57894: Prediction of Weld Bead Geometry of Mild Steel using Taguchi Technique and Multiple Regression Analysis
William E. Odinikuku1*, Joseph E. Udumebraye1 and David Atadious1
1Department of Mechanical Engineering, Petroleum Training Institute, Warri, Nigeria.

_____________________

 Article ID : 2020/JERR/57793: Effect of Company Strategies on Organisational Effect of Company Strategies on Organisational Performance in Nigerian Construction Industry 
U. V. Alintah-Abel1*, N. B. Iheama2 and S. C. Ugochukwu1
1Department of Quantity Surveying, Faculty of Environmental Sciences, Nnamdi Azikiwe University, P.M.B. 5025, Awka, Anambra State, Nigeria.
2Department of Building, Faculty of Environmental Sciences, Nnamdi Azikiwe University, P.M.B. 5025, Awka, Anambra State, Nigeria.

_____________________

Article ID : 2020/JERR/57247: Design and Construction of Electric Fish SmokingKiln Using Locally Available Composite Materials
Ogundana Odunayo Seyi1*, Abdulkadri Abdulakeem1, Jibril Danladi1
and Owa Taiwo Wumi2
Please check the Corresponding Author Name.
¹Department of Agricultural Technology, Federal College of Freshwater Fisheries Technology,
P.M.B. 1500, New Bussa Niger State, Nigeria.
²Ondo State Fadama Coordination Office, Alagbaka Akure, Ondo State, Nigeria.

_____________________

Article ID : 2020/JERR/56160: Measurement the Effects of Temperature and Fibre
Orientation on Vibration of Functionally Graded Beam
Sajad Babaei1, Zahra Hosseini Tabar1, Hossein Farahani1, Farzan Barati1 and
Mona Esfandiari1*
1Department of mechanical engineering, Islamic azad univercity, Hamedan brunch, Hamedan, Iran.

_____________________

 

Article ID : 2020/JERR/56158: Design and Implementation of an Audio Processor for Intelligent Domestic Car Production in Iran
Nima Ojaghi1*
1Islamic Azad University, Science and Research Branch, Tehran, Iran.

_____________________

Article ID : 2020/JERR/56495:Investigation and Optimization of Production Variables: A Case of Plastic Manufacturing Industry
Chukwuemeka Daniel Ezeliora1*, Maryrose N. Umeh2 and Anodebe Malachy Dilinna3
1Department of Industrial and Production Engineering, Nnamdi Azikiwe University, Awka,
Anambra State, Nigeria.
2Department of Computer Science, Nnamdi Azikiwe University, Awka, Anambra State, Nigeria.

3Department and University Name, Stellar House, 900 High Road, London, N170DP, UK.

_____________________

Article ID : 2020/JERR/56076: Effects of Simultaneous Temperature and Loading
Rate on Flow Curve for AZ62 Mg Alloy
Farzan Barati1*, Mona Esfandiari1, Sajad Babaei1, Ehsan Sheidaei1
and Amin Khodabandeloo1
1Department of Mechanics, Hamedan Branch, Islamic Azad University, Hamadan, Iran.

_____________________

 

 Article ID : 2020/JERR/56078: Modelling of AZ30 Magnesium Alloys Flow Curves/Deformation Behaviour at High Temperature Using the Ring Compression Test and Genetic Algorithm Method
Farzan Barati1*, Mona Esfandiari1, Sajad Babaei1, Ehsan Sheidaei1 and Amin Khodabandeloo1
1Department of Mechanics, Hamedan Branch, Islamic Azad University, Hamadan, Iran.

_____________________

 

Article ID : 2020/JERR/55908: Optimization of the Operational Conditions for Low- Head Pelton Wheel Turbine Developed for Power Generation
O. O. Oyebode1*
1Department of Food, Agricultural and Biological Engineering, Kwara State University,
Nigeria.

_____________________

Article ID : 2020/JERR/55880 : Evaluation of Furrow Irrigation System on Pepper  (Capsicum sp.,  Melka-shota var.)  Attanqua_Abergelle District, Tigray, Ethiopia
Efriem Tariku1* and GebreKiros Gebremedhin1
1Natural Resources Research Core Process, Abergelle Agricultural Research Center, P.O.Box 44, Abiy Addi, Tigray, Ethiopia.

_____________________

Article ID : 2020/JERR/55287 :   Influence of Climate Change on Building Design in Enugu South L.G.A OF Nigeria
N. B. Iheama1, S. C. Ugochukwu2 and Onyejiaka, Joseph Chukwudi3
1Department of Building, Faculty of Environmental Sciences, Nnamdi Azikiwe University, Awka,
Nigeria.
2Department of Quantity Surveying, Faculty of Environmental Sciences, Nnamdi Azikiwe University,
Awka, Nigeria.
3Department of Estate Management, Faculty of Environmental Sciences, Nnamdi Azikiwe University,
Awka, Nigeria.

_____________________

Article ID : 2020/JERR/54791: Potential Assessment of Small Hydro-Wind-Solar
Hybrid Power System for Off-grid Rural Electrification, Geba Cathment, Tekeze Basin, Ethiopia
Getachew Tesfaye1 and Abebe Temesgen2*
2Faculty of Hydraulic and Water Resources Engineering, Arba Minch Water Technology Institute, Arba Minch, Ethiopia.

_____________________

 

Article ID : 2019/JERR/53367 : Assessment of the Hydraulic Performance of the Drainage System in Dire Dawa Town
Moges Tariku1*
1Department of Civil Engineering, Addis Ababa Science and Technology University Addis Ababa,
Ethiopia.

_____________________

Article ID : 2019/JERR/53334 : Numerical Simulation of Permeable a Caissons Barriers
Mohamed Ibrahim1*
1Department of Civil Engineering, Faculty of Engineering, Al-Azhar University, Cairo, Egypt.

_________________

 Article ID : 2019/JERR/52645 : Design Approach for Quality Improvement and Cost Reduction: A Case Study of Cable Manufacturing
Chukwuebuka M. U. Dominic1*, Harold C. Godwin1 and Nkemakonam Igbokwe1
1Department of Industrial and Production Engineering, Nnamdi Azikiwe University, Awka, Nigeria.

_________________

Article ID : 2019/JERR/49857 :Reviving Traditional Iranian Architecture in Contemporary Construction
Alireza Adeli1*, Amir Reza Mohammadi2 and Reza Vahedi3
1Department Architecture, Islamic Azad University, Tabriz Branch, Tabriz, Iran.
2Department of Architecture, Payame Noor University, Osko Branch, Osko, Iran.
3Department of Architecture, Osveh Institute of Higher Education, Tabriz, Iran.

___________________

 

Article ID : 2019/JERR/51957 : Lateral Response Behavior of Symmetric High-Rise Buildings
Osama A. Kamal1, Ahmed H. Abdel-Kareem2*, Hala M. Refat2
and Ahmed M. Abd El Salam2*
1Department of Civil Engineering, Shoubra Faculty of Engineering, Benha University, Egypt.
2Department of Civil Engineering, Benha Faculty of Engineering, Benha University, Egypt.

___________________

Article ID : 2019/JERR/51605 : Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company
N. C. Igbokwe1* and H. C. Godwin1
1Department of Industrial and Production Engineering, Nnamdi Azikiwe University, Awka, Nigeria.

___________________

Article ID : 2019/JERR/51414 : Development and Validation of Task Instructional Sheet in Electrical Installation for Problem-Based Learning Environments in Technical Colleges
K. R. E. Okoye1 and E. E. Caleb2*
1Department of Technology and Vocational Education, Nnamdi Azikiwe University, Awka, Nigeria.
2Department of Vocational Education, University of Uyo, Uyo, Nigeria.

___________________

Article ID : 2019/JERR/50372 : Well Placement Technique and Production Optimization for Mature Field: A Case Study of L-X Field
Patrick Nwafora1* and Kelani Bellob1
1Department of Petroleum Engineering, University of Benin, Nigeria.

___________________

 

 Article ID : 2019/JERR/48597 : The Working Principle of a Turbine “Case Study: GE Frame 9E Gas Turbine”

Obolo Olupitan Emmanuel1*

1Department of Metallurgical and Materials Engineering, Federal University of Technology, PMB 704, Akure, Nigeria.

__________________

 Article ID : 2018/JERR/46357 : Accuracy Assessments of GPS and High-Resolution Satellite Image for Cadastral Surveying

Tata Herbert1* and Nzelibe Ifechukwu Ogochukwu1

1Department of Surveying and Geoinformatics, Federal University of Technology, Akure, Nigeria.

__________________

 

Article ID : 2018/JERR/43926 : Energy Conservation in Tillage with the Application of Plastic Mulching: A Review
P. S. Joshi1*, S. V. Pathak1 and P. U. Shahare1
1Department of Farm Machinery and Power Engineering, College of Agricultural Engineering and Technology, Dapoli, India.

________________________

 

Article ID : 2018/JERR/43829 : An Efficient Colouring Algorithm for Time Detraction of Sign Image Segmentation Based on Fuzzy Graph Theory
Ganesh Kumar Thakur1* and Bandana Priya2
1Krishna Engineering College, Ghaziabad, Uttar Pradesh, India.
2GL Bajaj Institute of Technology and Management, Greater Noida, Uttar Pradesh, India.

________________________