Journal of Engineering Research and Reports

Due to the advancement in science and technology all over the world, there is a significant increase in the rate of crime and sophistication in crimes; as a result, it is necessary to ensure the security of one’s self and one’s valuable belongings. The main goal of this paper is aimed at creating an electronic security system capable of detecting an intruder and reporting to security personnel. The design of the microcontroller based electronic digital lock with security notification uses a four-digit pass key for its operation. The operation involves opening the door, closing the door, changing of password and alarm upon wrong password entry. It is important for use in Bank Vaults, Hotels, Offices and can also be used in our homes. The research objectives were achieved with the use of microcontroller which programs the ATMEGA328P microprocessor and interfaces it with all the other components in the circuit. In the end, the circuit was able to activate the relay switches for opening and closing the door in about three seconds, and the alarm sounds when it detects a wrong password. Comparison was made between the conventional traditional lock system and the proposed one. The distinctive feature added is the sliding door, the security notification feature and the password modification in case of a breach in security. The design fulfills the requirements of supporting conventional lock systems eliminating the use of ordinary keys shared among occupants. To demonstrate and evaluate the design, a prototype was developed. As compared to other microcontroller based digital lock, it is easy and it required less hardware. It doesn’t need additional A/D and D/A converter. We can set the password and reset it without using external device and can be easily implemented. The evaluation shows that the design works well, consumes minimal power and is able to unlock a door.Atmega328p Microcontroller was used as the main component of the project.