Comparative Study of Cement Replacement with Waste Plastic in Interlocking Paving Stone for Highway Construction in Nigeria
Journal of Engineering Research and Reports,
Page 20-29
DOI:
10.9734/jerr/2023/v24i1794
Abstract
Portland cement remains the major binder used in the construction of concrete pavements, interlocking stones, and many other aspects of construction, and this implies a high dependence on the commodity thus making it scares and expensive and hence the need to explore other alternatives. This research compares the use of waste plastics and Portland cement for the production of paving stones. In this study, three cases were considered, each case having a study sample and a control sample. Case 1, case 2, and case 3 had mix ratios of (in order of, binder to sand to granite) 1:1:1, 1:1:1.5, and 1:1.5:2.5 respectively, of which the controls were made using Portland cement as the binder and the samples were made with waste plastic as the binder. The comparison was done using compressive strength and water absorption resistance values of the controls and the sample. The results showed that paving stones made from Portland cement have better compressive strength in all cases compared to the samples, the highest compressive strength obtained from the controls was 45N/mm2 while that of the sample was 25N/mm2, however, the study sample showed the highest water absorption resistance percentage of 5%, when compared to the control samples which had as low as 0.8%. This infers that paving stones made from melted waste plastics may not be as strong as those made from Portland cement can be used for roads expected to carry lighter traffic, and are also very suitable for areas of high water table or areas prone to flooding. The samples in this research were made locally and were limited to the three mix ratios mentioned. Further research can be done using a mechanized method to produce the samples, also partial replacement of cement with waste plastic may hence the strength of the paving stone.
Keywords:
- Paving stone
- waste plastic
- cement
- compressive strength
- percentage of water absorption resistance
How to Cite
References
Etim, M. Cement Production in Nigeria. Encyclopedia.
Accessed 03 January 2023.
Available:https://encyclopedia.pub/entry/14248
Atishay L, Savita D, Alternatives to Cement in Concrete – A Review, International Journal of Scientific & Engineering Research. 2015;6(10)
Pooja L, Dilraj PK, Seema R, Jyoti S. Recycling/reuse of plastic waste as construction material for sustainable development: A review; 2021.
Sogbanmu T O, Plastic pollution in Nigeria is poorly studied but enough is known to urge action. The Conversation; 2022.
Accessed 22 December 2022
Available:https://theconversation.com/plastic-pollution-in-nigeria-is-poorly-studied-but-enough-is-known-to-urge-action-184591#:~:text=With%20about%202.5%20million%20tonnes,in%20Nigeria%20is%20not%20recycled
Ojuri O. Interlocking paving stones Pavement as a Solution to Marshy Roads’ Modern Applied Science. 2012; (6)5:92.
Properties of Plastics - Structure, Types, and Uses
Accessed January 3, 2023.
Available:https://www.vedantu.com/chemistry/properties-of-plastics.
Properties of cement. Advanced Concrete. Ques10.
Accessed January 3, 2023.
Available:https://www.ques10.com/p/33170/properties-of-cement-1/
Lenkiewicz Z, Webster M, Hatfield S. How to transform plastic waste into paving tiles, Making Waste Work: A Toolkit. WasteAID UK; 2017.
Road Engineering Standard Policy Committee (RDB/-) ‘Part 1. Specification for paving blocks’ British Standard 6717: Precast concrete paving blocks, 15 December 1993.
Dawodu, P. O., Akindele, A., & Imoh, U. Recycling of Waste Plastic for the Production of Road Interlocking Paving Stone in Nigeria. Journal of Engineering Research and Reports. 2022;23(12):296-301.
Available:https://doi.org/10.9734/jerr/2022/v23i12785
BS 75331 Guide for the structural design of heavy-duty pavements constructed of clay pavers or precast concrete paving blocks, Pavements constructed with clay, natural stone or concrete pavers, British Standard Institution: London, UK; 2001.
Owais, M. Traffic sensor location problem: Three decades of research. Expert Systems with Applications. 2022; 208.
Available:https://doi.org/10.1016/J.ESWA.2022.118134
Owais, M., ABDOU S. AHMED. Digital Object Identifier Frequency Based Transit Assignment Models: Graph Formulation Study; 2022.
-
Abstract View: 73 times
PDF Download: 35 times
