Epoxy Fillet Height Study of Tapeless QFN Leadframe Package on Different Diebonders
Journal of Engineering Research and Reports,
The paper focused on the evaluation of quad-flat no-leads (QFN) device in tapeless leadframe technology on different diebonder platforms to achieve an acceptable fillet height performance. The study was narrowed down into two main machines with the objective of attaining a fillet height of less than 75 % for small die. Eventually, the fillet height requirement was achieved by both diebonder platforms, hence, these machines could be used for future works on devices with similar requirement.
- Diebond process
- fillet height
How to Cite
Harper C. Electronic packaging and interconnection handbook. 4th ed., McGraw-Hill Education. USA; 2004.
Xian TS, Nanthakumar P. Dicing die attach challenges at multi die stack packages. 35th IEEE/CPMT International Electronics Manufacturing Technology Conference. Malaysia; 2012.
Greig WJ. Integrated circuit packaging, assembly and interconnections. 1st ed. Springer. USA; 2007.
Liu Y, et al. Trends of power electronic packaging and modeling. 10th Electronics Packaging Technology Conference. Singapore. 2008;1-11.
Bacquian BC, et al. Bond line thickness characterization for QFN package robustness. Journal of Engineering Research and Reports. 2020;14(2);15-19.
Su Y, et al. Effect of transfer pressure on die attach film void performance. IEEE 11th Electronics Packaging Technology Conference (EPTC). Singapore. 2009;754-757.
Rodriguez R, et al. A study of dispense needle for die attach voids mitigation. Journal of Engineering Research and Reports. 2020;14(1):25-29.
Abdullah S, et al. Dicing die attach film for 3D stacked die QFN package. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. USA. 2007;73-75.
Song SN, et al. Die attach film application in multi die stack package. IEEE 7th Electronics Packaging Technology Conference (EPTC). Singapore. 2005;4;848-852.
Seguido R, et al. Support structure for stacked integrated circuit dies. US Patent No. US9258890B2; 2016.
Sumagpang Jr. A, Rada A. A systematic approach in optimizing critical processes of high density and high complexity new scalable device in MAT29 risk production using state-of-the-art platforms. Presented at the 22nd ASEMEP Technical Symposium, Philippines; 2012.
Buenviaje Jr. S, et al. Process optimization study on leadframe surface enhancements for delamination mitigation. IEEE 22nd Electronics Packaging Technology Conference (EPTC). Singapore. 2020;95-100.
Eng TC, et al. Methods to achieve zero human error in semiconductors manufacturing. IEEE 8th Electronics Packaging Technology Conference (EPTC). Singapore. 2006;678-683.
Abstract View: 52 times
PDF Download: 23 times