A Study of Die Shear Test Performance on Different Diebond Machine Platforms
Journal of Engineering Research and Reports,
Page 19-23
DOI:
10.9734/jerr/2020/v16i317169
Abstract
The paper focused on the evaluation of quad-flat no-leads single-row (QFN-sr) leadframe package for die shear test performance on different diebond machine platforms. Die shear test determines the adhesion strength on the interface between the silicon die and the die attach glue to the diepad of the leadframe device. Moreover, the test is critically monitored as failed response may lead to die lift or delamination. Statistical results showed the two diebond machines achieving die shear test performance above the specification, with Machine Y having significant improvement over its counterpart. Future works could utilize any of the two diebond machines platforms as far as die shear test performance is concerned. For devices with critical requirement, Machine Y is recommended for its higher die shear test performance capability.
Keywords:
- Diebond process
- die shear test
- assembly manufacturing
- leadframe
How to Cite
References
Xian TS, Nanthakumar P. Dicing die attach challenges at multi die stack packages. 35th IEEE/CPMT International Electronics Manufacturing Technology Conference (IEMT). Malaysia. 2012; 1-5.
Sumagpang Jr. A, Rada A. A systematic approach in optimizing critical processes of high density and high complexity new scalable device in MAT29 risk production using state-of-the-art platforms. Presented at the 22nd ASEMEP Technical Symposium, Philippines; June 2012.
Tsukada Y, Kobayashi K, Nishimura H. Trend of semiconductor packaging, high density and low cost. Proceedings of the 4th International Symposium on Electronic Materials and Packaging. Taiwan. 2002;1-6.
Coombs C, Holden H. Printed circuits handbook. 7th ed., McGraw-Hill Education, USA; March 2016.
May GS, Spanos CJ. Fundamentals of semiconductor manufacturing and process control. 1st ed., Wiley-IEEE Press, USA; 2006.
Harper C. Electronic packaging and interconnection handbook. 4th ed., McGraw-Hill Education, USA; October 2004.
Meng LH, Lee, E. Hoe MC. Thermal simulation study of die attach delamination effect on tqfp package thermal resistance. 34th IEEE/CPMT International Electronic Manufacturing Technology Symposium (IEMT). Malaysia. 2010;1-6.
STMicroelectronics. Glue and tape die attach in process control. rev. 54; March 2020.
Rodriguez R, Gomez FR. Rubber-tip design improvement for die crack elimination at diebond process. Journal of Engineering Research and Reports. 2020;12(2);1-5.
-
Abstract View: 718 times
PDF Download: 650 times