Evaluation of Corrosion Performance of LDX 2101 and UNS S32205 in Flexible Pipeline Applications: A Comparative Study

Michael Gumoshabe *

Department of Mechanical and Materials Engineering, Faculty of Techno Science, Muni University, P.O Box 725, Arua, Uganda.

Innocent M. Opio

Department of Mechanical and Materials Engineering, Faculty of Techno Science, Muni University, P.O Box 725, Arua, Uganda.

Jackson Makanga

Department of Mechanical and Materials Engineering, Faculty of Techno Science, Muni University, P.O Box 725, Arua, Uganda.

Saimon Kule

Department of Mechanical and Materials Engineering, Faculty of Techno Science, Muni University, P.O Box 725, Arua, Uganda.

Douglas Ongom

Department of Mechanical and Materials Engineering, Faculty of Techno Science, Muni University, P.O Box 725, Arua, Uganda.

*Author to whom correspondence should be addressed.


Abstract

Lean duplex stainless steel (LDSS) has been used in various applications, including flexible pipelines in offshore and other industrial settings. In recent years, LDSS has become the preferred choice over standard duplex stainless steel (DSS) for flexible pipeline applications due to its lower costs, achieved by reducing nickel and molybdenum content, while still providing comparable corrosion resistance and mechanical strength properties to DSS. However, there is still limited reporting on the corrosion effects of reducing these alloys on the behaviour of lean duplex stainless steel in flexible pipelines. This comparative study investigates the corrosion resistance of lean duplex stainless steel, LDX 2101 and duplex stainless steel, UNS S32205 in flexible pipeline applications using linear polarization resistance (LPR). The research focuses on assessing material performance in environments containing CO2 and H2S, commonly found in oil and gas production, by conducting short-term and long-term tests to evaluate pitting and selective corrosion. The samples, LDX 2101 and UNS S32205 were immersed in a 3.5M NaCl solution, and corrosion measurements were performed using the Metrohm Autolab potentiostat. The results indicate that both materials exhibit good corrosion resistance, but there are differences in their performance under specific conditions. While lean duplex stainless steel, LDX 2101, can be used as a substitute for duplex stainless steel UNS S32205, its corrosion resistance and mechanical properties gradually decrease over time due to the reduced nickel and molybdenum content. As a result, it would not be as effective as duplex stainless steel UNS S32205 in withstanding corrosion in aggressive conditions over a prolonged period.

Keywords: Lean duplex stainless steel (LDX 2101), duplex stainless steel (UNS S32205), corrosion, flexible pipeline, nickel, molybdenum, linear polarization resistance


How to Cite

Gumoshabe, Michael, Innocent M. Opio, Jackson Makanga, Saimon Kule, and Douglas Ongom. 2024. “Evaluation of Corrosion Performance of LDX 2101 and UNS S32205 in Flexible Pipeline Applications: A Comparative Study”. Journal of Engineering Research and Reports 26 (10):1-12. https://doi.org/10.9734/jerr/2024/v26i101285.